Thermo PLA 3D Printer Filament 2.85mm Colour Changing Grey 500g Easy to Print

Description

MagicFil Thermo PLA is a unique 3D printer filament that features a color-changing ability when heated above 29°C. Its anthracite grey color transforms into a natural PLA color at this temperature. This filament is based on a high-quality impact modified PLA compound optimized for FFF/FDM 3D printing technology. It offers enhanced toughness and improved filament flow making it easy to print.

Unique features

• Color changing ability from anthracite grey to natural PLA at 29°C
  • Anthracite grey color below 29°C; natural PLA color above 29°C
• Very easy to print
  • Warp-free printing with no deformation after cooling
  • Improved flow behavior and inter-layer adhesion
  • Good first layer adhesion to various (un)heated print surfaces
• Slightly softer than standard PLA resulting in improved strength and impact resistance
• Almost odorless during processing/printing
• Biodegradable

General printing guidelines

Note: The settings provided are guidelines to help find optimal print settings. These ranges should work for most printers but experimentation outside these ranges is encouraged if suitable for your printer.

Filament length

Compliance

This filament complies with the following directives and regulations:

• RoHS directive 2011/65/EC
• REACH directive 1907/2006/EC

This declaration of conformity is based on current knowledge and may be updated as new information becomes available and applies only to the described products.